To clean sea water intake systems there are two methods:

1. Open-Loop Circulation: This preferred method recirculates the MGR cleaning solution with a flushing system or the system pump.
2. Immersion: The simplest cleaning technique, though the slowest, involves completely filling the system with the MGR cleaning solution and allowing it to soak, usually overnight.

See our Technical Data Sheet for detailed usage instructions.

To clean parts such as: sea chest, valves, strainers, pipes, etc:

1. Soak parts in MGR
2. Create agitation by either adding an air hose to the tank or with a plastic centrifugal pump.
3. Let the product work for 4 to 8 hours (depending of the amount of residue).
4. Wash off with fresh water or a pressure washer.
5. Repeat if necessary.

To remove marine growth from your vessel’s hull:

1. Ensure surfaces are dry for best results.
2. Spray diluted MGR on surface and let the product work for at least 15 minutes. Do not allow product to dry.
3. Repeat if necessary.
4. Wash off completely with fresh water or a pressure washer.

To clean air conditioning systems there are two methods:

1. Open-Loop Circulation: This preferred method recirculates the MGR cleaning solution with a flushing system or the system pump.
2. Immersion: The simplest cleaning technique, though the slowest, involves completely filling the system with the MGR cleaning solution and allowing it to soak, usually overnight.

Contact us for detailed usage instructions.

To clean air conditioning condenser coils there are two methods:

1. Open-Loop Circulation: This preferred method recirculates the MGR cleaning solution with a flushing system or the system pump.
2. Immersion: The simplest cleaning technique, though the slowest, involves completely filling the system with the MGR cleaning solution and allowing it to soak, usually overnight.

Contact us for detailed usage instructions.